BMRGV - INTERTUF HF CURING AGENT, JXA230
- MSDS: BMRGV
- Manufacturer: INTERNATIONAL PAINT INC
- Product Name: INTERTUF HF CURING AGENT, JXA230
- National Stock Number: 8010-00N025960
Product Identification
Product ID:INTERTUF HF CURING AGENT, JXA230
MSDS Date:03/31/1988
FSC:8010
NIIN:00N025960
MSDS Number: BMRGV
Responsible Party
US
Emergency Phone: 713-682-1711
Info Phone: 713-682-1711
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
2.1 @ 20C.
CAS: 110-43-0
RTECS: MJ5075000
Fraction By Weight: 25-30%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM
EPOXY RESIN
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: 70-75%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION MAY OCCUR. SKIN:
IRRITATING. MAY RESULT IN DERMATITIS. MAY CAUSE SENSITIZATION OR
OTHER ALLERGIC RESPONSES. INHAL: MAY CAUSE IRRITATION. INGEST: MAY
CAUSE GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES: FLUSH IMMEDIATLEY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:
REMOVE CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND
WATER. LAUNDE R CLOTHES BEFORE REUSE. INHAL: REMOVE TO FRESH AIR.
GET MEDICAL ATTENTION IMMEDIATELY. INGEST: CALL MD IMMEDIATELY TO
DETERMINE WHETHER OR NOT TO INDUCE VOMITING.
Fire Fighting
Flash Point Method:SCC
Flash Point:110F,43C
Lower Limits:1.1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBANT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STORAGE OF LIQUIDS WITH NFPA CLASS II RATING.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT. CHRONIC OVEREXPOSURE
TO, AND MISUSE OF, SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESPIRATOR TO REMOVE SOLID AIR-BORNE
PARTICLES OF OVERSPRAY DURING SPRAY APPLICATN. IN RESTRICTED VENT
AREAS, USE A NIOSH/MSHA APPRVD RESPIRATOR I/A/W (SUPP DATA)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS BELOW LIMS & TO REMOVE DECOMP PRODS (SUPP DATA)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: MUST NOT BE USED AS AN EXTINGUISHING MEDIA. TAKE CARE
TO PREVENT SPREAD OF BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT. RESP PROT: 29 CFR 1910.134 TO REM OVE
A COMBINATION OF PARTICULATES AND VAPORS. VENT: DURING WELDING OR
FLAME CUTTING ON SURFACES COATED WITH THIS PROD.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:25(WT)
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS, ALDEHYDES.
Disposal
Waste Disposal Methods:DISPOSE I/A/W LOCAL, STATE, AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.